Perform Easy Setup - Eizo DuraVision FDF2304W-IP Manual

●

Perform Easy Setup

Necessary settings for displaying network camera images on the monitor.
1.
Start up the network camera(s).
For network camera setup, refer to the network camera's manual.
2.
Press on the remote control to turn on the monitor.
The live image screen is displayed.
Note
• The monitor can also be turned on by pressing
Attention
• The monitor starts up in approximately one minute. (A rotating bar indicating startup is displayed.) Do not turn
off the monitor during startup.
• When the monitor is started up for the first time, a menu for operating the monitor and network cameras is
displayed.
• When no network camera is registered, a "Not Registered" message is displayed at the network camera
image display area.
Network camera image display area
3.
Start the Easy Setup function from the menu.
If the menu is not displayed, press
●
Menu Operations
10
on the front of the monitor.
Message display area
to display the menu.
Display mode menu:
Operate the menu with the function buttons (
For details, refer to "Chapter 3 Operating the System" in the
User's Manual.
Menu
, , ,
System setup menu / Camera control menu:
• To select an item
Press the / / / buttons.
(The currently selected item is lit up in green.)
• To confirm a selected item
Press .
• To change a setting
1. Press . (The list box is highlighted in
green.)
2. Select the setting with
3. Press .
*When canceling a setting change in process, press
.
• To return to the previous menu level
Press .
, ,
).
or .