Table of Contents
Advertisement
1
adhesive
2
3
14
INSTALL COOKTOP – FLUSH
Prepare the countertop for flush
installation. Use a router to cutout
the edges of the countertop to
specified depth (6mm). Ensure all
bare edges are sealed. Refer to
'Installation Considerations'.
Attach an adhesive tape along
the edges of the routered recess.
Slot the two filter housing
components together before
fitting to the rear of the cooktop.
Attach the four side clips
to the cooktop chassis.
Ensure the clips are
oriented correctly.
Filter housing
Ducting
4
6
Align vertical ducting to the
outlet to the cooktop before
rotating and lowering it into
the cutout.
Tape the ducting to secure.
Apply silicone in the gap between
countertop and cooktop.
Wipe off any excess silicone.
Advertisement
Table of Contents
