Integra DTR-5 Instruction Manual page 33

Using the remote controller
MD
operation
buttons
Numeric keys,
ENT button
MODE
AUDIO/TAPE
TAPE
operation
buttons
Controlling an Onkyo/Integra MD recorder
Note:
Make sure that you point the transmission part on the remote con-
troller toward the sensor area on the MD recorder.
1. Press the MODE MD/AUX button.
2. Press the desired MD operation button.
MODE MD/AUX
Turning the power on and off to the MD recorder
POWER ON/STNBY
REC
EJECT
1~9, +10
ENT
You may also use the following buttons:
VOL q / u
MUTING
Controlling an Onkyo/Integra tape deck
Note:
First connect an Onkyo/Integra tape deck using the
tion. (See page 9.)
1. Press the MODE AUDIO/TAPE button.
2. Press the desired tape deck operation button.
REC
You may also use the following buttons:
VOL q/u
MUTING
MODE SAT, CABLE, VCR, and TV buttons
No preset codes are programmed into the MODE SAT, CABLE,
VCR, and TV buttons. You can use these buttons to program
MODE SAT,
remote controller signals of other devices. (See page 34.)
CABLE, VCR,
You may use the following buttons:
TV
VOL q/u
MUTING
: Turning on or standby the power to the MD
recorder
: Down
: Up
: Playback
: Stop
: Rewind
: Fast forward
: Record
: Pause
: Eject
: Numeric keys
: Confirm
: Adjusting the volume level of the DTR-5
: Muting the sound from the DTR-5
: Playback
: Stop
: Rewind
: Fast forward
: Recording/pause
: Reverse playback
: Adjusting the volume level of the DTR-5
: Muting the sound from the DTR-5
: Adjusting the volume level of the DTR-5
: Muting the sound from the DTR-5
connec-
33