Integra DTR-5 Instruction Manual page 22

Using Listening Mode
3. Use these buttons to
set the Listening mode
parameters.
(Refer to page 23).
VOL button (qup/udown)
Use this button to adjust the volume level.
CH SEL/LEVEL+/– buttons
1
MULTI CH
INPUT
TAPE
2
STEREO /DTS SURROUND
22
POWER
2. LISTENING MODE buttons
These button allow you to select a
listening mode.
DVD VIDEO 1 VIDEO 2 VIDEO 3
FM AM PHONO C D
LISTENING MODE
5 CH STEREO DSP
DIMMER
DISPLAY
1. Input selector buttons
Select the desired input source.
2. INPUT SELECTOR buttons
Select the desired input source.
3. Listening mode button
These buttons allow you to select a Surround mode.
Using Listening Mode
1. Press one of the INPUT SELECTOR buttons to select the
desired sound source.
2. Use the LISTENING MODE buttons to select the desired
Listening mode.
STEREO: Press this button to listen to a normal stereo audio.
/DTS SURROUND: Press this button when you wish to
play Dolby ProLogic, Dolby Digital, or DTS Surround sound.
5CH STEREO: Press this button to play 5-ch stereo sound (see
page 21).
DSP √/®: Press this button repeatedly to select the desired
Listening mode. Each option appears in the following sequence:
STEREO
5ch STEREO TV LOGIC
3. Play the selected source.
Follow the steps below to make adjustment to the speaker level
set by the Test Tone.
1. Press the MODE AUDIO button.
2. Press the CH SEL button to select a speaker.
3. Press the LEVEL +/– buttons to adjust the level.
MASTER VOLUME
VOLUME knob
Use this knob to adjust
the volume level.
1. Press the MODE
AUDIO button
/DTS SURROUND ORCHESTRA
STUDIO-MIX UNPLUGGED