Integra DTR-5 Instruction Manual page 32

Using the remote controller
MODE CD
CD
operation
buttons
Numeric keys
DVD
operation
buttons
Numeric keys,
ENT button
32
Controlling an Onkyo/Integra CD player
Note:
First connect an Onkyo/Integra CD player using the
tion.
1. Press the MODE CD button.
2. Press the desired CD operation button.
TRACK
DISC
EJECT
0, 1~9, +10
You may also use the following buttons:
VOL q / u
MUTING
Controlling an Onkyo/Integra DVD player
Note:
Make sure that you point the transmission part on the remote con-
troller toward the sensor area on the DVD player.
1. Press the MODE DVD button.
2. Press the desired DVD operation button.
POWER ON/STNBY
MODE DVD
DVD SET
DVD player on-screen button
MENU
ququ
ENTER
RETURN
DVD player buttons
EJECT
0, 1~9, +10
ENT
You may also use the following buttons:
VOL q / u
MUTING
Note:
The ENT button on the right below the numeric keys has the same
function as "ENTER" of the ENTER/cursor button.
: Selecting a track
: Selecting a disk in the CD changer
: Down
: Up
: Playback
: Stop
: Rewind
: Fast forward
: Pause
: Eject
: Numeric keys
: Adjusting the volume level of the DTR-5
: Muting the sound from the DTR-5
: Turning the power on and off to the DVD
player
: DVD setup
: Displaying the menu
: Moving the cursor
: Confirming the selection
: Return
: Down
: Up
: Playback
: Stop
: Rewind
: Fast forward
: Pause
: Eject
: Numeric keys
: Confirm
: Adjusting the volume level of the DTR-5
: Muting the sound from the DTR-5
connec-