Integra DTR-5 Instruction Manual page 26

Using preset radio stations
1
FM
2
PRESET / MODE ADJ
DOW N
2
MEMORY
3
26
1, 2
Remote controller
AM
3
Remote controller
UP
ENTER / SCAN
Selecting a preset station
1. Select the tuner as the source by pressing the AM or FM
input selector button on the main unit.
2. Enter the desired preset number using the PRESET/MODE
ADJ √/® button.
Remote controller operation
1. Press the MODE AUDIO button.
2. Select the tuner as the source by pressing the TUN input
selector button on the remote controller.
3. Press the CH (– or +) button.
Cancelling preset stations
1. Select the preset station you wish to remove as explained in
the previous section.
2. Press the MEMORY button twice.
"PRESET ERASE" appears on the display.
ch
3. While "PRESET ERASE" is displayed, press the ENTER/
SCAN button.
Once the preset station has been cancelled, the memory location
can be used to store another station.