Wine Display For Wine Cabinet (Optional) - Fisher & Paykel RS2484S Installation Manual

Handle assembly
Retainer blocks are pre-assembled at the bottom of both ends of the handle.
1
2
3
Wine label kit
1
2

WINE DISPLAY FOR WINE CABINET (OPTIONAL)

Loosen the screws until the
retainer blocks can be inserted
between slats of display rack.
Align handle to the front end of
display rack.
Rotate retainer block to lock
position and tighten screw to lock
handle in place.
Write the name or type of
wine on the label.
Fit label over front edge of rack
to match displayed wine.
Cradle assembly
A retainer block is pre-assembled at the bottom of each cradle. Use a spacer to correctly
position the cradle and avoid wine bottles being too upright resulting in bottles tipping over.
1
2
3
3
Insert retainer block at desired
location between slats of display
rack. Do not tighten.
Place 'cradle guide' on the slats
behind the handle..
Align cradle on spacer based on
size and type of wine bottle.
Rotate the retainer block to lock
position, and tighten screw.
Remove cradle guide from the rack
after use.
Wipe the labels with a damp cloth
to erase.
57