Fisher & Paykel RS2484S Installation Manual page 59

Detach the top door hinge
Detach the bottom door hinge — For Refrigerator & Freezer / Wine Cabinet
a
B
d
E
Do not
remove!
CHANGE THE DOOR HINGES (OPTIONAL)
A
b
D
f
1 Rotate the bottom hinge (A)
outwards and remove bottom hinge
pocket cover (B) using a flat head
C
screwdriver in the slot.
E
2 Remove the hinge by unscrewing the
M6x16 countersunk screws (2x) (C).
3 Open the water filter hatch on
F
the bottom grille and unscrew the
#8x16 screw (D) while holding the
grille in place.
4 Remove the bottom grille by
unscrewing the #8x16 screws (E) from
the bottom left and right of the grille.
5 Remove bottom hinge
bracket by unscrewing M6x16
countersunk screws (F).
IMPORTANT!
Do not remove plinth-to-cabinet
retention brackets!
1 Rotate the top hinge (A) outwards and remove the top hinge pocket cover (B)
C
using the flat head screwdriver in the slot of the cover.
2 Unscrew M6x16 countersunk screws (C) to remove top hinge, and set
aside to use later.
E
3 Unscrew M6x16 countersunk screws (D) from hinge pocket to remove hinge
pocket and top alcove bracket.
4 Unscrew M5x12 countersunk screws (E) to remove top hinge bracket and spacer.
5 For the non-hinge side, remove the top alcove bracket by unscrewing the M6x16
countersunk screws (F).
Detach the middle door hinge — For Refrigerator-Freezer
B
A
1 Rotate the middle hinge (A) and
C
unscrew M6x16 countersunk screws (B)
to remove middle hinge, and set
aside to use later.
2 Unscrew M5x12 countersunk
screws (C) to remove top hinge
bracket and spacer.
59