Changing Over Door Hinge (Optional) - Fisher & Paykel RB2470BRV1 Installation Manual

This model is right hinged with a left-opening door. If required, you can change this model to left hinged with a right-opening door.
Left hand cover
Remove the left hand
cover by levering from
the outer edge.
Remove the covers on the left and right ends of the control panel using a
1
flat-head screwdriver.
A
2 When changing the hinge position
remove the hinge hole plugs (A).
!1

CHANGING OVER DOOR HINGE (OPTIONAL)

Right hand cover
Hinge cover
Remove the right hand cover by
levering from the outer edge.
Remove the hinge cover by
levering from the inner edge.
B
3 Remove the remaining hinge covers (B).
C
RIght hinged door
Remove the door hinges (C) and refit to the opposite side (as illustrated above).
4
Insert the hinge covers (B).
5
6 Insert the hinge hole plugs to the holes on the opposite side (A).
Left hinged door
11