Multiple Installation - Join Products - Fisher & Paykel RS2484S Installation Manual

Joiner fastener kit Fit lower joiner bracket
Joiner Sleeve (2)
Bolt M5 HEX (2)
1
M6 Hex Nut (1)
Screw WSH M6 (1)
2
MULTIPLE INSTALLATION — JOIN PRODUCTS
Carefully roll both products halfway
into cabinetry.
Take note of the upper and lower
joiner locations illustrated.
Clamp the lower brackets together
using the supplied M6 screw and
Nut. Secure using a 3/16" (4mm)
Allen key and 3/8" (10mm) spanner.
Ensure brackets are clamped tightly
before proceeding.
Fit upper joiner bracket
1
2
3
Illustrations may differ from your purchased appliance.
Clamp the upper brackets together
by fitting the first the supplied
M5 bolt and joiner sleeve. Tighten
using a 5/16" (8mm) socket and
Phillips screwdriver until the sleeve
sits flush.
Handle to handle installations:
Fit the second supplied M5 bolt
and joiner sleeve.
For handle to handle install, use
two bolts from both sides.
For handle to hinge, only one joiner
bolt from handle side be inserted.
Ensure the flange joiners contact
the adjacent product as shown.
51