Fisher & Paykel RS2484S Installation Manual page 26

Dimensions apply for the preparation and installation of Custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
The thickness of the custom door panel can vary provided that the screws do not penetrate beyond the full depth of the door panel.
11 7/8" (302mm)
8" (203mm)
1 5/16" (33mm)
23 3/4" (603mm) single install
23 13/16" (605mm) dual install
24" REFRIGERATOR-FREEZER
26
CUSTOM DOOR PANEL INSTALL DIMENSIONS
3 7/16" (88mm)
2" (51mm)
TOP DOOR PANEL
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Do not place pilot holes for
handle attachment in marked
areas to avoid clashing with
panel attachment brackets.
11 7/8" (302mm)
8" (203mm)
3 1/4" (83mm)
1 5/16" (33mm)
2" (51mm)
23 3/4" (603mm) single install
23 13/16" (605mm) dual install
24" REFRIGERATOR-FREEZER
DRAWER PANEL
Cutouts in the hanging
bracket are applicable for
Fisher and Paykel handles only.
If locating a custom handle in
the shaded area shown above,
ensure handle screw heads are
countersunk into the back of the
door panel to avoid interference
with the hanging bracket.
Toe kick height 6" (152mm)
Toe kick height 4" (102mm)
Toe kick height 2" (51mm)