Fisher & Paykel RS2484S Installation Manual page 44

Miscellaneous Attaching the mounting plate
components
Air toe kick seal (1x)
Toe kick install kit
Toe kick panel (1x)
Magnets (4x)
8Gx16 Mush washer
screws (4x)
1
Tools
Cross-head
screwdriver
M4 hex key (1x)
2
Powered driver
44
Illustrations may differ from your purchased appliance.
TOE KICK INSTALLATION
Re-attach the toe kick mounting plate
to the plinth using same screws that
were set aside previously.
If toe kick depth is less than 3 5/8"
(92mm), attach an air toe kick seal to
the mounting plate.
Peel off the adhesive tape of air toe
kick seal and attach to the middle of
the back side of the mounting plate.
Press firmly to ensure the tape adheres
to the mounting plate.
Stainless steel toe kick
Purchased separately. Visit fisherpaykel.com for information.
Single installation
Dual installation
Triple installation
Stainless steel panel
Custom toe kick
Suppplied by customer to match cabinetry.
Stainless steel panel
Custom panel
Stainless steel panel
Custom panel
Custom panel