I Programming The Memory/Call Channels - Icom IC-V8 Instruction Manual

6
MEMORY/CALL OPERATION
I Programming the memory/call
channels
q
Push [D•
necessary.
w
Set the desired frequency.
e
Set other information, such as tone,
duplex, as desired.
r
Push [A•
ily.
• " X " and memory channel number
blink.
t
Push [Y] or [Z] to select the desired
memory channel.
• When programming the call channel,
select "C."
• When [VOL] is assigned as tuning dial,
rotate [VOL] to select the memory
channel. (pgs. 17, 53)
y
Push [A•
emitted) to program the information into the selected memory
channel and return to VFO
• Continue to hold [C•
to increment the displayed memory channel number
26
] to select VFO mode, if
CLR
], then [C•
FUNC MR
], then push [C•
FUNC
] down for 1 sec. after 3 beeps are emitted,
MR
[C•
[Y]
] momentar-
[Z]
[A•
[D•
] for 1 sec. (until 3 beeps are
MR
]
MR
]
FUNC
]
CLR
.