Icom IC-V8 Instruction Manual page 20

2
PANEL DESCRIPTION
D Key pad
4
[A• ]
FUNC
Access to secondary function.
[B• ]
CALL
Select the call channel. (p. 25)
[C• ]
MR
➥ Selects a memory mode. (p. 25)
➥ After pushing [A•
gramming/editing mode. (pgs. 26, 28)
➥ After
pushing
VFO/memory or call channel contents into memory
channel/VFO when pushed for 1 sec. (pgs. 26, 28)
[D• ]
CLR
Selects VFO mode, aborts direct frequency input, or
cancels scanning, etc. (pgs. 16, 33)
[1• ]
TONE
➥ Input digit "1" during frequency input, memory chan-
nel selection, etc. (pgs. 16, 25)
➥ After pushing [A•
function. (pgs. 21, 37)
[2• . ]
P BEEP
➥ Input digit "2" during frequency input, memory chan-
nel selection, etc. (pgs. 16, 25)
➥ After pushing [A•
tion ON and OFF (p. 39)
[3• . ]
T SCAN
➥ Input digit "3" during frequency input, memory chan-
nel selection, etc. (pgs. 16, 25)
➥ After pushing [A•
(pgs. 23, 40)
], entering into memory pro-
FUNC
[A• ], programs/transfers
FUNC
], selects the subaudible tone
FUNC
], turn the pocket beep func-
FUNC
], starts the tone scanning.
FUNC