I Auto Repeater Function (Usa Versions Only) - Icom IC-V8 Instruction Manual

5
REPEATER OPERATION
I Auto repeater
function
The USA version automatically activates the repeater settings (du-
plex, ON/OFF, duplex direction, tone encoder ON/OFF) when the
operating frequency falls within or outside of the general repeater
output frequency range. The offset and repeater tone frequencies
are not changed by the auto repeater function. Reset these fre-
quencies, if necessary.
q
While pushing [Y] and [Z], turn the power ON to enter
SET MODE
w
Push [Y] or [Z] several times until "RPt." appears.
e
Rotate [VOL] to select the desired condi-
tion.
• "OF"— the auto repeater function is turned
• "R1"— the auto repeater function activates
• "R2"— the auto repeater function activates
r
Push [#•
Frequency range and offset direction
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
24
(USA version only)
.
OFF;
for duplex only;
for duplex and tone.
] to exit
ENT
USING
INITIAL SET MODE
DUPLEX DIRECTION
INITIAL SET MODE
.
"–" appears
"+" appears
INITIAL