Memory/Call Channels; I General Description; I Selecting A Memory Channel - Icom IC-91A Instruction Manual

8

MEMORY/CALL CHANNELS

I General description

The IC-91A/91AD has 850 memory channels in A band, 450
memory channels in B band, and 2 call channels in each
band. Memory channels in each bands including 50 scan
edge memory channels
frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in each
bands for storing groups of frequencies, etc. Up to 100 chan-
nels can be assigned into a bank.
D D Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency
• Operating mode
• Duplex direction
(p. 31)
• Subaudible tone encoder
squelch ON/OFF
• Subaudible tone frequency
quency or DTCS code with polarity
• Scan skip information
• Memory bank
(p. 67)
• Memory name
• Tuning step
(p. 18)
• Call sign squelch or Digital code squelch*
• Station call sign*
• RPT1/RPT2 call sign*
*Available for B band operation only.
64
for storage of often-used
(25 pairs)
(p. 18)
(p. 21)
with an offset frequency
(+DUP or –DUP)
, tone squelch or DTCS
(p. 107)
(p. 110)
, tone squelch fre-
(p. 107)
(pgs. 107, 111)
(p. 80)
(p. 70)
(p. 110)
(p. 36)
(p. 41)

I Selecting a memory channel

D D Using [DIAL]— Programmed channels
qPush [MR] to select memory mode.
wRotate [DIAL] to select the desired memory channel.
• Only programmed channels are displayed.
[DIAL]
146 010
D D Using [DIAL]— All channels
qPush [MR] to select memory mode.
wPush and hold [S.MW](MR) for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
• "µ µ
" indicator blinks.
eRotate [DIAL] to select the desired memory channel.
• All channels are displayed.
• Push [VFO] to return to memory mode indication.
Appears
µ 000 000
Rotate [DIAL] to select
the memory channel.