Scan Operation; I Scan Types - Icom IC-91A Instruction Manual

9

SCAN OPERATION

I Scan types

Scanning searches for signals automatically and makes it
easier to locate new stations for contact or listening purposes.
FULL SCAN
(p. 75)
495
kHz
Scan
Jump
PROGRAMMED SCAN
(p. 75)
Band Scan edges
edge
xxA
Scan
Jump
ALL/SELECTED BANK
SCAN
(p. 78)
SKIP
A00 A01
A99
A98 A05
74
Repeatedly scans all frequen-
cies over the entire band.
999.990
MHz
Some frequency ranges are
not scanned according to the
frequency coverage of the
transceiver's version.
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
Band
edge
xxB
for frequencies within a speci-
fied range such as repeater
output frequencies, etc.
Repeatedly scans all bank
channels or selected bank
channels. The skip scan is
also available.
A02
A03
SKIP
A04
There are 7 scan types and 4 resume conditions to suit your
operating needs.
SELECTED BAND SCAN
(p. 75)
Band Band
edge edge
Scan
Jump
MEMORY (SKIP) SCAN
(p. 77)
SKIP
M 1 M 2 M 3
M 0
M 4
SKIP
M 199 M 6 M 5
FREQUENCY/MEMORY
SKIP FUNCTION
(p. 79)
Band Band
edge edge
Scan
SKIP SKIP
Jump
Repeatedly scans all frequen-
cies over the entire selected
band.
Repeatedly scans memory
channels except those set as
skip channel. Skip channels
can be turned ON and OFF
by pushing and holding
[SKIP](5) in memory mode.
Skips unwanted frequencies
or channels that inconve-
niently stop scanning. This
function can be turned ON
and OFF by pushing and
holding [SKIP](5) in either
VFO or memory mode.