P/N 424382A
REPLACING EVAPORATOR FAN
MOTORS AND BLADES
Refer to the data sheet shipped with each mer-
chandiser to determine location of evaporator
fans. Should it ever be necessary to service or
replace the fan motors or blades, be certain that
the fan blades are re-installed correctly. T
BLADES MUST BE INSTALLED WITH RAISED
(
EMBOSSING
PART NUMBER ON BLADES
TIONED AS INDICATED ON THE PARTS LIST OF THE
.
DATA SHEET
For access to these fans:
1. Turn off power to the merchandiser.
2. Remove wire racks and bottom display pans.
3. Disconnect fan motor from wiring harness.
4. Remove 6 screws attaching fan assembly to
plenum. Lift fan assembly out of plenum.
Fan
Assembly
Power Cord
Bushing
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
(See next page for location of replaceable parts.)
)
POSI
Screw
Chain
Hook
Plug
SERVICE
!
Always disconnect the electrical power at the
main disconnect when servicing or replacing
any electrical component. This includes, but
HE
is not limited to, such items as fans, heaters,
thermostats and lights.
-
5. Remove nut, fan blade, and gasket.
6. Remove screws holding bottom of motor to
bracket.
Gasket
Bracket
WARNING
Motor
Lock Nut
Tool
Nut
Fan Blade
Screws
Tape
Motor
Frozen Meat and Seafood
6-1