Connector-Side Description; Power-Supply Module Installation - Cisco ME 3400E Hardware Installation Manual

Power-Supply Module Installation

Table 3-2
AC-Power-Supply Module
LED
Off
Green
Red
DC-Power-Supply Module
LED
Off
Green
Red

Connector-Side Description

Figure 3-4
panel through its power-supply slot.
Figure 3-4
1
Power-Supply Module Installation
•
•
•
•
Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide
3-4
PSU OK LED Descriptions
Description
No input power.
Operating normally. Input, 12-V output, and both fans OK.
Fault detected: 12-V output, fan failure, or input out of range.
Description
No input power.
Operating normally. Input, 12-V output, and both fans OK.
Fault detected: 12-V output, fan failure, or input out of range.
shows the connector side of the power-supply module, which connects to the switch rear
Power-Supply Module Connector Side
2
Fans Connector pins
Tools and Equipment, page 3-5
Installation Guidelines, page 3-5
Installing an AC-Power-Supply Module, page 3-6
Installing a DC-Power-Supply Module, page 3-8
Chapter 3 Installing and Removing AC- and DC-Power-Supply Modules
1
2
OL-16447-01