Cisco ME 3400E Hardware Installation Manual page 13

Chapter 1 Product Overview
The Cisco ME 3400EG-12CS-M has 12 dual-purpose ports, numbered 1 to 12, and supports both AC and
DC power. You can configure these as either copper-based 10/100/1000 ports or as fiber-optic
SFP-module ports. The Gigabit Ethernet uplink SFP-module slots are numbered 13 to 16.
Figure 1-2
1
1 AC-power input connectors 1 and 2
2
DC-power input connectors A and B
3 LEDs
4 Alarm input port
5 Console port
The Cisco ME 3400EG-2CS-A has two dual-purpose ports, numbered 1 and 2. See
configure these ports as either copper-based 10/100/1000 ports or as fiber-optic SFP-module ports. The
Gigabit Ethernet uplink SFP-module slots are numbered 3 and 4.
OL-16447-01
Cisco ME 3400EG-12CS-M Front Panel
6
2
3
4
5
7
8
9
6 Ethernet management port
7
SFP-module slots
8 10/100/1000 ports
9 Gigabit Ethernet SFP-module slots
Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide
Front Panel
Figure 1-3. You can
1-3