Cisco ME 3400E Hardware Installation Manual page 42

Installing the Switch
Cisco ME 3400EG-2CS-A
Mount the switch with the side panel facing up
The side that has the air vents must face up.
Caution
Figure 2-15
1
You need to do these tasks to complete the installation:
•
•
Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide
2-18
Mounting the Cisco ME 3400EG-2CS-A on a Wall
1
User-supplied screws
Power on the switch. See the
Connect to a 10/100 port or to the RJ-45 connector of a dual-purpose port, and run the initial
configuration dialog. See the Cisco ME 3400E Ethernet Access Switch Getting Started Guide for
instructions.
(Figure 2-15).
1
"Verifying Switch Operation" section on page
Chapter 2 Switch Installation
2-5.
OL-16447-01