JETWAY NF792R Series User Manual page 44

The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the hour/minute/second specified.
Wake-up Hour
Use this item to 0-23. For example, 3 for 3am and 15 for 3pm
Wake-up Minute
Use this item to 0-59.
Wake-up Second
Use this item to 0-59.
Wake-up System with Dynamic Time
Use this item to enable or disable system wake-up by RTC alarm.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the current time + increased
minute(s).The settings range is from [1] ~ [60] minute(s).
Wake-up Time Increase
Use this item to 1 to 60 minute(s)
USB Wake-Up from S3-S4
The optional settings: [Disabled]; [Enabled].
*Note: USB wake-up function is affected by ERP function in S4. Please disable
ERP before activating this function in S4.
When set as [Enabled], the following items shall appear:
PS2 KB/MS Wake-Up from S3-S5
The optional settings: [Disabled]; [Enabled].
*Note: PS2 KB/MS wake-up function is affected by ERP function in S4-S5. Please
disable ERP before activating this function in S4-S5.
 USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
Legacy USB Support
The optional settings are: [Enabled]; [Disabled]; [Auto].
[Enabled]: To enable legacy USB support.
[Disabled]: To keep USB devices available only for EFI specification,
39