JETWAY NF792R Series User Manual page 33

suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
 Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
 Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port 1 Configuration
Serial Port
Use this item to enable or disable serial port (COM).
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=4]; [IO=2F8h; IRQ=3]; [IO=3E8h;
IRQ=4]; [IO=2E8h; IRQ=3].
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485].
Mode Speed Select
The optional settings are: [RS232/RS422/RS485=250Kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].
Serial Port FIFO Mode
The optional settings are: [16-Byte FIFO]; [32-Byte FIFO]; [64-Byte FIFO];
[128-Byte FIFO].
 Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port 2 Configuration
Serial Port
Use this item to enable or disable serial port (COM).
28