JETWAY NF792R Series User Manual page 36

ERP Support
The optional settings: [Disabled]; [Enabled].
This item should be set as [Disabled] if you wish to have all active wake-up
functions.
Case Open Detect
Use this item to detect case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will detect if COPEN has been short or not (refer to
Pin 1&2 of COPEN jumper setting for Case Open Detection); if Pin 1&2 of COPEN
is short, system will show Case Open Message during POST.
PS2 KB/MS Connect
Use this item to setting PS2 Connect Primary Devices
The optional settings are: [Keyboard First]; [Mouse First].
WatchDog Reset Timer
Use this item to support WDT reset function.
The optional settings: [Disabled]; [Enabled]
When set as [Enabled], the following sub-items shall appear:
WatchDog Reset Timer Value
User can set a value in the range of [10] to [255].
WatchDog Reset Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer
Use this item to support WDT reset function.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Wake-up Timer Value
The setting range is [10] ~ [4095] seconds, or [1] ~ [4095] minutes.
WatchDog Wake-up Timer Unit
The optional settings are: [Sec.]; [Min.].
31