JETWAY NF792R Series User Manual page 35

Device Settings
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=11]; [IO=2F8h; IRQ=11];
[IO=3E8h; IRQ=11]; [IO=2E8h; IRQ=11] ; [IO=2F0h; IRQ=11] ; [IO=2E0h; IRQ=11]
Serial Port FIFO Mode
The optional settings are: [16-Byte FIFO]; [32-Byte FIFO]; [64-Byte FIFO];
[128-Byte FIFO].
 Parallel Port Configuration
Press [Enter] to make settings for the following items:
Parallel Port Configuration
Parallel Port
Use this item to enable or disable serial port (LPT/LPTE).
When set as [Enabled], user can make further settings in the following items:
The optional settings are: [Disabled]; [Enabled].
Device Settings
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=378h; IRQ=5];
[IO=378h; IRQ=5,6,7,9,10,11,12]; [IO=278h; IRQ=5,6,7,9,10,11,12];
[IO=3BCh; IRQ=5,6,7,9,10,11,12].
Device Mode
The optional settings are: [STD Printer Mode]; [SPP Mode]; [EPP-1.9 and SPP
Mode]; [EPP-1.7 and SPP Mode]; [ECP Mode]; [ECP and EPP 1.9 Mode]; [ECP
and EPP 1.7 Mode].
OS Select for Serial Port
Use this item to serial port support for Windows or Linux
The optional settings: [Windows]; [LINUX].
30