JETWAY NF792R Series User Manual page 34

When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=4]; [IO=2F8h; IRQ=3]; [IO=3E8h;
IRQ=4]; [IO=2E8h; IRQ=3]
Serial Port FIFO Mode
The optional settings are: [16-Byte FIFO]; [32-Byte FIFO]; [64-Byte FIFO];
[128-Byte FIFO].
 Serial Port 3 Configuration
Press [Enter] to make settings for the following items:
Serial Port 3 Configuration
Serial Port
Use this item to enable or disable serial port (COM).
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=10]; [IO=2F8h; IRQ=10];
[IO=3E8h; IRQ=10]; [IO=2E8h; IRQ=10] ; [IO=2F0h; IRQ=10] ; [IO=2E0h; IRQ=10]
Serial Port FIFO Mode
The optional settings are: [16-Byte FIFO]; [32-Byte FIFO]; [64-Byte FIFO];
[128-Byte FIFO].
 Serial Port 4 Configuration
Press [Enter] to make settings for the following items:
Serial Port 4 Configuration
Serial Port
Use this item to enable or disable serial port (COM).
When set as [Enabled], user can make further settings in the following items:
29