Stopping Engine - Shindaiwa EB910RT Operator's Manual

EB910 / RT

Stopping Engine

EB910
1. Throttle Lever
Move throttle lever (A) to IDLE
position and allow engine to
return to idle before shutting off
engine.
2. Throttle Lever
Move throttle lever (A) to
(STOP) position.
EB910RT
1. Throttle Lever
Release throttle trigger. Move
Throttle Lever (A) forward to idle
position and allow engine to
return to idle before shutting off
engine.
2. Throttle Lever
Move Throttle Lever (A) all the way forward to STOP position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
X7501200801
© 09/22 ECHO Incorporated
A
EB910
A
EB910RT
OPERATION
31