Starting Warm Engine; Stopping Engine - Shindaiwa Echo PB-580 H Operator's Manual

OPERATION

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke.v
1. Throttle Lever
Move throttle lever (A) to IDLE
position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible. Pump bulb an additional
4 or 5 times.
3. Recoil Starter
Pull recoil starter handle (D) and
engine should start. Do not use
choke (B)
Note: If engine does not start
after 5 pulls, use cold
start procedures.

Stopping Engine

- PB-580 H
1. Throttle Lever
Move throttle lever (A) to IDLE
position and allow engine to
return to idle before shutting off
engine.
2. Throttle Lever
Move throttle lever (A) to "
(STOP) position.
28
PB-580 H
PB-580 T
A
C
D
PB-580 H
PB-580 T
A
O
"
PB-580H/T
A
B
A
X7505200609
© 1/20 ECHO Incorporated