Table of Contents
Advertisement
EB262
Stopping Engine
1.
Throttle Trigger/Throttle
Position Lever
Release throttle trigger (A).
Move throttle position lever (B)
forward to idle position and allow
engine to return to idle before
shutting off engine.
2.
Stop Switch
Move stop switch (C) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
Operating Blower
Always wear safety glasses, hearing protection and a face filter
mask or serious personal injury may result. Do not point the
blower pipe in the direction of people or pets.
X7501190802
© 09/19 ECHO Incorporated
OPERATION
B
C
A
25
Advertisement
Table of Contents
