Install Blower Pipes - Shindaiwa EB910RT Operator's Manual

ASSEMBLY
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove two pipes and install according to
steps 8 and 9.
EB910RT
Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.

Install Blower Pipes

1. Assemble clamps (A) and (G)
onto both ends of flexible pipe
(B).
Note: Clamp with cable guide
loop (G) fits elbow end of
flexible pipe.
2. Insert anti-static wire through
flex tube.
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower
elbow.
22
EB910 / RT
G
B
© 09/22 ECHO Incorporated
A
X7501200801