Shindaiwa EB910RT Operator's Manual page 13

EB910 / RT
Check unit for loose/missing nuts, bolts, and screws.
◆
Tighten and/or replace as needed.
Do not use blower if any part is missing or damaged.
◆
Have repairs done only by an authorized service dealer.
◆
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make
◆
sure all moving parts have come to a complete stop before
removing obstructions, clearing debris, or servicing unit.
DO NOT start or operate unit unless all guards and
◆
protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running.
◆
Moving parts might not be visible through openings.
Periodically check fuel system (fuel lines, vent, grommet, fuel
tank, and fuel cap) for leaks especially if the unit is dropped. If
damage or leaks are found, do not use unit, otherwise serious
personal injury or property damage may occur. Have unit
repaired by an authorized servicing dealer before using.
X7501200801
© 09/22 ECHO Incorporated
SAFETY
13