Table of Contents
Advertisement
7
Related Parameters
Parameters related to the use of the LCD Operator Option are listed below. Set these
parameters as needed for the application.
No.
Name
Language
A1-00
Selection
Frequency
b1-01
Reference
Selection 1
Run
b1-02
Command
Selection 1
Frequency
b1-15
Reference 2
Run
b1-16
Command
Source 2
YASKAWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
Table 11 Related Darameters
Language selection for the LCD Operator Option.
This parameter is not reset when the drive is initialized by
parameter A1-03.
0: English
1: Japanese
2: German
3: French
4: Italian
5: Spanish
6: Portuguese
7: Chinese
Selects the source of the frequency reference.
0: Operator -Digital preset speed d1-01 to d1-17
1: Terminals - Analog input terminal A1 or A2
2: MEMOBUS/Modbus serial communications
3: Option PCB
4: Pulse Input (Terminal RP)
Selects the run command input source.
0: Operator -RUN and STOP keys on the LCD Operator Option
1: Digital input terminals S1 to S7
2: MEMOBUS/Modbus serial communications
3: Option PCB
Selects the frequency reference input source.
0: Operator - Digital preset speed d1-01 to d1-17
1: Terminals - Analog input terminal A1 or A2
2: MEMOBUS/Modbus serial communications
3: Option PCB
4: Pulse Input (Terminal RP)
Selects the Run command input source.
0: Operator - RUN and STOP keys on the LCD Operator Option
1: Digital input terminals S1 to S7
2: MEMOBUS/Modbus serial communications
3: Option PCB
7 Related Parameters
Description
Default
0
1
1
0
0
33
Advertisement
Table of Contents
