Eds Files; Related Drive Parameters - YASKAWA SI-S3 Installation Manual

Ac drive option canopen

Hide thumbs Also See for SI-S3:

Table of Contents

Connect the included ground wire for installations on 1000-series, GA500, and FP605 drives. The ground

wire is not necessary for installation on GA700 or GA800 drives.

◆

EDS Files

For easy network implementation of drives equipped with a CANopen Option, an EDS

file can be obtained from: U.S.: http://www.yaskawa.com Europe: http://www.yaskawa.

eu.com Japan: http://www.e-mechatronics.com Other areas: Check the back cover of these

manuals. For questions, contact Yaskawa or a Yaskawa representative. You can download

drive manuals from the Yaskawa product and technical information website shown on the

back cover of this manual.

These parameters set the drive for operation with the option. Confirm correct parameter

settings in this table before you start network communications.

Note:

Hex.: MEMOBUS addresses that you can use to change parameters over network communication are

represented in hexadecimal numbers.

YASKAWA TOEP C730600 85A CANopen Installation Manual

Figure 5.23 Termination Resistor Connection

6 Related Drive Parameters

Table of Contents