Configuring The Library; Managing User Access - IBM TS2900 Manual

Component
3 Drive
4 Accessor
5 Cartridge
6 Slots
Configuring the library

Managing user access

Users that can access the library are added, modified, or removed by using the Web User Interface. Up to seven users can be configured with the Web User
Interface.
Configuring library settings
Configure the physical and logical library settings.
Configuring network settings
After the network settings are entered on the Operator Panel, the current network configuration of the library can be modified with the Web User Interface. The
changes that are made to the network settings take effect after the library is rebooted.
Configuring encryption
Configuring date and time settings
Configuring email notifications
Email notifications can be configured to notify you when a library event takes place.
Configuring SNMP notifications
SNMP notifications can be configured for this library.
Uploading and configuring the SSL certificate
Saving and restoring configuration settings
Managing user access
Users that can access the library are added, modified, or removed by using the Web User Interface. Up to seven users can be configured with the Web User Interface.
Figure 1. User Access screen
Displays the drive information:
Status (OK, Degraded, or Failed).
Drive Status displays Empty, Loading, or Ejected when the drive is empty, loading media, or media is ejected/unloaded in
the drive. It displays Cleaning when the cleaning cartridge is in the drive, and Calibrating while performing media
optimization. See Media optimization
Vendor ID
Product ID
Serial number
F/W version (firmware)
Worldwide ID (node name)
Encryption method (None)
Displays the accessor status (OK, Degraded, or Failed).
Displays the cartridge information
Media status (OK, Degraded, or Failed)
Cartridge label that is detected by the bar code reader.
Encryption setting for data cartridges (Not encrypted, Encrypted, or Unknown)
Remain - Number of uses left for cleaning cartridges. When a cleaning cartridge is added to the library (I/O station or cleaning
slot), the remaining uses is displayed as 50. The actual remaining uses are updated when the cleaning cartridge is loaded into
the tape drive.
Write protect (Yes or No)
Note: Write protect status is only detected and displayed when a cartridge is in a drive.
Each column has a spring loaded mechanism that pushes the cartridges into Tier 1. Moving a second cartridge into a column moves
the first cartridge into Tier 2.
Note:
1. Cartridges cannot be moved directly from Tier 1 in one column to Tier 2 in another column in a single move operation
(intermediate move operations are required).
2. Cartridges cannot be moved to the accessor with Move command. However, cartridges can be moved from the accessor with
this command if the library was powered OFF with a cartridge that is still held in the accessor.
Status
TS2900 Tape Autoloader 31