IBM TS2900 Manual page 62

Code (H) Description
0000 No valid error code information.
0001 At power-on initialization, a firmware error
was detected.
0002 At power-on initialization, a RAM (base area)
error was detected.
0003 At power-on initialization, a RAM (buffer
area) error was detected.
0008 A usable drive was not detected.
0009 The accessor locking screw has not been
removed.
0010 Information acquisition from the DHCP
server failed.
0011 Time acquisition from the NTP server failed.
0020 LDI I/F error.
Transmit data abnormality detected (NAK
reception).
0021 LDI I/F error.
Receive timeout detected (ACK/NAK
reception).
0022 LDI I/F error.
Response packet reception timeout
detected.
0023 LDI I/F error.
ENQ receive timeout detected.
0024 LDI I/F error.
Receive data abnormality detected.
0029 LDI command ends abnormally.
002A Commands to the Encryption Key Manager
over the retry limit.
002B Commands to the encryption capable drive
over the retry limit.
002C LDI I/F error.
ACK IU event timeout detected.
002D LDI I/F error.
Response IU event timeout detected.
002E LDI I/F error.
Transfer Ready IU event timeout detected.
002F LDI I/F error.
Undefined error detected.
0040 A drive media error detected upon insertion.
Table 1. Library error codes
Panel
Indication
- -
All 4 LEDs ON 1. Upgrade or reinstall firmware and try again.
2. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
Ready or
operations resume. See
Activity LED ON
If the problem persists, see
and Error LED
ON
CHK 0003
CHK 0008 1. Observe LEDs. See
2. Reseat all cables. See
3. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
operations resume. See
If the problem persists, see
CHK 0009 1. Remove the accessor locking screws. See
screw.
2. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
operations resume. See
If the problem persists, see
- 1. Observe LEDs. See
2. Confirm the DHCP server settings.
3. Reseat all cables. See
4. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
operations resume. See
If the problem persists, see
- 1. Observe LEDs. See
2. Confirm the time server settings.
3. Reseat all cables. See
4. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
operations resume. See
If the problem persists, see
- 1. Observe LEDs. See
2. Reseat all cables. See
3. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
-
operations resume. See
If the problem persists, see
-
-
-
- 1. Confirm the Encryption Key Manager settings.
2. Reseat all cables. See
3. Cycle the power supply and try again.
-
If the problem is corrected, run Library Verify before normal library
operations resume. See
If the problem persists, see
- 1. Reseat all cables. See
2. Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library
operations resume. See
If the problem persists, see
- Cycle the power supply and try again.
If the problem is corrected, run Library Verify before normal library operations
-
resume. See
If the problem persists, see
-
-
CHK 0040 1. Verify that the cartridge is compatible with the drive in your library. See
Action Required
Running library verify
Contacting IBM technical
Front panel Indicators.
Reseating cables.
Running library verify
Contacting IBM technical
Removing the accessor locking
Running library verify
Contacting IBM technical
Front panel Indicators.
Reseating cables.
Running library verify
Contacting IBM technical
Front panel Indicators.
Reseating cables.
Running library verify
Contacting IBM technical
Front panel Indicators.
Reseating cables.
Running library verify
Contacting IBM technical
Reseating cables.
Running library verify
Contacting IBM technical
Reseating cables.
Running library verify
Contacting IBM technical
Running library verify test.
Contacting IBM technical
TS2900 Tape Autoloader 57
test.
support.
test.
support.
test.
support.
test.
support.
test.
support.
test.
support.
test.
support.
test.
support.
support.
Table