IBM TS2900 Manual page 51

Task
Set active slots count Configure Library > Physical/Logical > Logical Settings. See
library
Set date and time Configure Library > Date and Time. See
settings.
Set email notification Configure Library > SMTP. See
Set random or Configure Library > Physical/Logical > Logical Settings. See
sequential mode library
Set network settings Configure Library > Network. See
Set SNMP Configure Library > SNMP. See
Set SNTP Configure Library > Date and Time. See
settings.
Save and restore Configure Library > Save/Restore. See
configuration configuration
*
The date and time must be reset after restoring the factory default settings. See
Saving and restoring configuration
Important: This configuration setting deletes all current library settings, and should be used with utmost caution.
Task
Enable or disable I/O Configure Library > Physical/ Logical > Logical Settings > Number of
station active slots. See
Enable or disable back Not available with this interface
light
Set auto turn Off of Not available with this interface
back light
Run Encryption Key Service Library > Key Path Diagnostics. See
Path Diagnostic
Run Library Verify Not available with this interface
1
Service Library > Reset Library/ Drive
Reboot library
Take library online or Manage Library > Library State
2
offline
3
Manage Library > Unlock Magazine
Unlock magazine
4 Not available with this interface
Unlock I/O Station
Ship the library Not available with this interface
Conduct library Manage Library > Inventory
5
inventory
1. The library status may display Failed until the library is back online.
2. The tape drive is always online, even when the library is offline.
3. If the cartridge magazine is not removed within 5 minutes, it is automatically locked.
4. This menu option is available only when the I/O station is enabled in the library configuration settings.
5. An inventory is conducted automatically when power is first turned ON or when the cartridge magazine is removed and reinserted.
Task
Graphical view of library Monitor System > Library Map. See
View library settings Monitor System > Library Map
View library firmware Monitor System > System Summary
View library logs Service Library > View Library Logs. See
*
Service Library > View Library Log . See
View library error status
* Service Library > View Library Log . See
View drive error status
View network settings Monitor System > Library Map
View system summary Monitor System > System Summary
View usage statistics Service Library > Usage Statistics
* If an error occurs, press Enter to display specific error information. You can check the meaning of error codes in
Task
Clean drive Manage Library > Clean Drive
Download drive logs Service Library > Download Logs
Eject cartridge from Manage Library > Move Cartridges
drive
* Service Library > Reset Library/Drive
Reboot drive
Run drive test Not available with this interface
Unload drive Manage Library > Unload Drive. See
modes.
Update drive firmware Service Library > Firmware Update. See
firmware.
* The drive status may display Failed until the drive is back online.
46 TS2900 Tape Autoloader
Web User Interface
settings.
Configuring date and time
Configuring email
settings.
Configuring network
Configuring SNMP
Configuring date and time
Saving and restoring
settings.
settings.
Table 2. Managing the library
Web User Interface
Logical library settings.
Key Path
Table 3. Monitoring the library
Web User Interface
Graphical view of
Library
Library
Library
Web User Interface
Random and sequential logical library
Updating library and drive
Table 5. Managing cartridges
Logical Configuration > Configure Library > Set Active Slots Count. See
Configuring library
Configuration > Configure Library > Configure Date/Time. See
Configuring date and time
notifications. Not available with this interface
Logical Configuration > Configure Library > Configure Library Mode. See
Configuring library
settings. Configuration > Configure Network Settings. See
settings.
notifications. Not available with this interface
Configuration > Configure Library > Configure Date/Time. See
Configuring date and time
Not available with this interface
Configuring date and time
Configuration > Configure Library > Active Slots. See
settings.
Configuration > Configure Op Panel Settings > Configure LCD Back Light
Configuration > Configure Op Panel Settings > Configure LCD Back Light
> Enable Auto Back Light > Input Count
Diagnostics. Not available with this interface
Service > Diagnostics > Run Library Verify. See
test.
Commands > Reboot Library
Commands > Change Library State
Unlock Magazine
Unlock I/O Station
Commands > Move to Ship Position. See
Commands > Inventory
library. Not available with this interface
Configuration > View Settings
Service > View Firmware Revision
logs. Not available with this interface
logs. Service > View Error Status > View Library Error Status
logs. Service > View Error Status > View Drive Error Status
Configuration > View Settings
Not available with this interface
Not available with this interface
Table 4. Managing drive
Commands > Clean Drive
Not available with this interface
Commands > Move Cartridge
Commands > Reboot Drive
Service > Diagnostics > Drive Diagnostics
Commands > Unload. See
modes.
Not available with this interface
Operator Panel
settings.
settings.
settings.
settings.
settings. To restore your library configuration again, see
Operator Panel
Running library verify
Shipping the
Operator Panel
Error codes.
Operator Panel
Random and sequential logical library
Configuring network
Configuring library
library.