Cisco Router ASR 1006 Hardware Installation Manual page 30

or the applicable URL provided on the flyer accompanying the IOS-XE
software.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ASR1000 (RP1) processor with 753834K/6147K bytes of memory.
2 Packet over SONET interfaces
32768K bytes of non-volatile configuration memory.
2097152K bytes of physical memory.
439807K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at harddisk:.
1020584K bytes of USB flash at usb0:.
SETUP: new interface POS0/1/0 placed in "shutdown" state
SETUP: new interface POS0/1/1 placed in "shutdown" state
Press RETURN to get started!
*Feb 13 12:48:53.340: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Feb 13 12:48:53.513: %NETCLK-5-NETCLK_MODE_CHANGE: Network clock source not available. The network clock
has changed to freerun
*Feb 13 12:48:41.846: %CPPHA-7-SYSREADY: F0: cpp_ha:
*Feb 13 12:48:41.980: %IOSXE-6-PLATFORM: F0: cpp_cp:
successful
*Feb 13 12:48:42.084: %CPPHA-7-START: F0: cpp_ha:
*Feb 13 12:48:42.197: %CPPHA-7-START: F0: cpp_ha:
*Feb 13 12:48:47.581: %CPPHA-7-START: F0: cpp_ha:
*Feb 13 12:48:47.812: %CPPHA-7-READY: F0: cpp_ha:
*Feb 13 12:48:47.812: %CPPHA-6-SYSINIT: F0: cpp_ha:
*Feb 13 12:48:49.090: %IOSXE-6-PLATFORM: F0: cpp_cp: Process CPP_PFILTER_EA_EVENT__API_CALL__REGISTER
*Feb 13 12:48:54.382: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to
down
*Feb 13 12:48:57.074: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been loaded from the Shell
Manager
*Feb 13 12:48:59.697: %SYS-5-CONFIG_I: Configured from memory by console
*Feb 13 12:48:59.707: %ASR1000_OIR-6-REMSPA: SPA removed from subslot 0/1, interfaces disabled
*Feb 13 12:48:59.707: %ASR1000_OIR-6-REMSPA: SPA removed from subslot 0/2, interfaces disabled
*Feb 13 12:48:59.710: %ASR1000_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Feb 13 12:48:59.710: %ASR1000_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Feb 13 12:48:59.730: %ASR1000_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Feb 13 12:48:59.730: %ASR1000_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Feb 13 12:48:59.732: %ASR1000_OIR-6-INSSPA: SPA inserted in subslot 0/1
*Feb 13 12:48:59.735: %ASR1000_OIR-6-INSSPA: SPA inserted in subslot 0/2
*Feb 13 12:48:59.943: %SYS-5-RESTART: System restarted --
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE
SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 00:29 by mcpre
*Feb 13 12:49:01.253: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
Router>
During the boot process, observe the system LEDs. The LEDs on the shared port adapter go on and off in irregular sequence.
They may go on, go out, and go on again for a short time. On the router, the green STATUS LED comes on and stays on. For
software configuration information, see the Cisco ASR 1000 Series Aggregation Services Software Configuration Guide.
30
CPP client process FMAN-FP (5 of 5) ready.
cpp_mlp_svr_client_bind: cpp_mlp_svr_ifm_init()
CPP 0 preparing image /usr/cpp/bin/cpp-mcplo-ucode
CPP 0 startup init image /usr/cpp/bin/cpp-mcplo-ucode
CPP 0 running init image /usr/cpp/bin/cpp-mcplo-ucode
CPP 0 loading and initialization complete
CPP HA system configuration start.