Cisco Router ASR 1006 Hardware Installation Manual page 10

Using a Phillips screwdriver, insert one screw through cable-management bracket and into the chassis rack-mount and
Step 2
tighten the screw.
Note Use the package of four screws that came with your chassis (two screws for each bracket).
Figure 6 Attaching the Cable-Management Bracket to the Cisco ASR 1006 Router
Cable-management bracket screw location
1
Cable-management bracket
2
Step 3 Using the bottom rack-mount ear hole, insert the screw through cable-management bracket and into the chassis
rack-mount bracket (see
Using a Phillips screwdriver and the
Step 4
bracket.
Repeat Step 1through Step 4 for the other side of the Cisco ASR 1006 Router.
Step 5
This completes the procedure for installing the cable-management bracket on a Cisco ASR 1006 Router for a rack-mount
configuration.
10
1
3
2
1
Figure 6).
cable-management screw
SPA -4XO C3- POS
POS
SPA -4XO C3-
POS
SPA -4XO C3-
SPA -4XO C3- POS
POS
SPA -4XO C3-
SPA -4XO C3- POS
Chassis front rack-mount bracket and ear holes
3
— —
, thread and tighten the screw to the cable-management
SPA -4XO C3- POS
SPA -4XO C3- POS
POS
SPA -4XO C3-
SPA -4XO C3- POS
POS
SPA -4XO C3-
POS
SPA -4XO C3-