Verifying Power Supply Operation - Cisco Router ASR 1006 Hardware Installation Manual

Verifying Power Supply Operation

Follow this procedure to verify that the power supply is operating correctly in the Cisco ASR 1006 Router.
Step 1 Check that the power supply LEDs are:
• INPUT OK is green
• FAN OK is green
• OUTPUT FAILED is not illuminated
Step 2 To ensure that the power supply state is OK, type the show platform command. This output sample is from a Cisco
ASR1006 router. The other Cisco ASR1000 routers display similar type of output.
MCP_SCAL_R1#sho plat
Chassis type: ASR1006
The following output displays:
Slot Type
1 ASR1000-SIP10
1/1 SPA-8X1GE-V2
2 ASR1000-SIP10
2/0 SPA-1X10GE-L-V2 ok
2/1 SPA-8X1GE-V2
R0 ASR1000-RP1
F0 ASR1000-ESP20
P0 ASR1006-PWR-AC
P1 ASR1006-PWR-AC
Slot CPLD Version
1 07091401
2 07091401
R0 08060301
F0 08041102
MCP_SCAL_R1#
If the LEDs indicate a power problem or the power supply state is ps,fail, then contact a customer service representatives for
assistance or additional instructions.
24
State Insert Time
ok 00:03:19
ok 00:02:23
ok 00:03:19
00:02:22
ok 00:02:17
ok,active 00:03:19
ok,active 00:03:19
ok 00:02:50
ps, fail 00:02:50
Firmware
Version
12.2(33r)XN2
12.2(33r)XN2
12.2(0:0)
12.2(33r)XN2