Cep Expansion Carrier; Specifications - Emerson PACSystems RX3i User Manual

User Manual
GFK-2883F
1.2

CEP Expansion Carrier

The RX3i CEP Expansion Carrier is attached to the RX3i CEP Carrier and provides the ability
to add one additional RX3i IC694 I/O module to the remote node. It is used only with an RX3i
CEP Carrier, which performs I/O scanning of the Expansion Carrier. The RX3i CEP Expansion
Carrier does not have Ethernet or USB interfaces, nor does it require an external power
source
1.3

Specifications

Item
PROFINET support
RX3i Controller version required
RXi Controller version required
PAC Machine Edition version
required
Power requirements
Module dimensions
Operating temperature range
Number of port connectors
USB connector (for firmware
upgrades)
PNS Status and Control bits
I/O data update on the
PROFINET LAN
Number of IP addresses
Number of MAC addresses
2 Value does not include the power consumption of the installed I/O modules. When calculating the total power requirements, you will
need to add the power consumption of the I/O modules according to the I/O module datasheet.
Overview
Specification
PROFINET Version 2.3 Class A I/O-Device
IC695CPU315/CPU320/ CPE305/CPE310/CPE330/CRU320
with firmware version 8.50 or later. All versions of CPE302.
IC69PNC001 PROFINET I/O-controller with firmware version
2.20 or later
RXi Controller with firmware version 7.80 or later is compatible
with CEP001 up to version 2.01 but is not compatible with
CEP001 version 2.30 or later.
Version 8.6 with SIM3 or later
IC695CEP001: 5.25W (0.22 A) at 24 Vdc with or without
Expansion Carrier
(IC694CEE001)1 2 DC power supply input range: 19.2V – 30V
177.2 mm x 51 mm x 35 mm (6.98 in x 2.01 in x 1.38 in)
Same for CEP001 and CEE001.
0°C to 60°C (32° F to 140° F) maximum surrounding air
temperature
IC695CEP001: Two RJ-45 10/100BASE-TX receptacles
IC694CEE001: None
IC695CEP001: One Micro-B connector. USB 2.0 compliant
running at Full-speed (12 MHz) in device mode
IC694CEE001: None
32 input status bits and 32 output control bits
Configurable: 1ms, 2ms, 4ms, 8ms, 16ms, 32ms, 64ms,
128ms, 256ms and 512ms
One. Supports Classless Inter-Domain Routing (CIDR)
Three. One per external port and one internal. External MAC
addresses are only used for specialized Ethernet protocols such
as MRP or LLDP
Chapter 1
Sep 2019
2