Compatibility - Emerson PACSystems RX3i User Manual

User Manual
GFK-2883F
Module Description
Catalog
Number
IC695ALG728 8-Point Analog Current / Voltage Output
(HART Support)
IC695ALG808 8-Point Isolated Analog Current / Voltage Output
Analog Mixed Modules
IC693ALG442 4-Input / 2-Output, Current / Voltage
IC694ALG442 4-Input / 2-Output, Current / Voltage
Thermocouple Input Modules
IC695ALG312 12-Point Isolated Thermocouple Input
High-Speed Counter Modules
IC695HSC308 High-Speed Counter Module, 1.5MHz,
16 Inputs, 14 Outputs
Specialty Modules
IC694PSM001 Power Sync and Measurement Module
1.7

Compatibility

The PROFINET Scanner modules require the CPU firmware and programming software
versions listed in the following table
Table 3
PAC Machine Edition
RX3i CPU Version
RX3i PNC Version
RXi Controller Version
RX3i I/O Modules
HART Pass Through
Overview
5,6
5
PAC Machine Edition version 8.6 SIM 3 or later
PACSystems RX3i CPU, IC695CPU315/CPU320/CPE305/
CPE310/CPE330/CRU320, with firmware version 8.50 or later
PACSystems RX3i PROFINET IO-Controller, IC695PNC001,
with firmware version 2.20 or later
Effective with IC695CEP001 Firmware version 2.30, the
PACSystems RXi Distributed I/O Controller, ICRXICTL000, is
no longer compatible with IC695CEP001. ICRXICTL000 with
firmware version 7.80 or later may be used with CEP001
version 2.01 or earlier.
For a complete list of modules supported by the current
firmware release, refer to the section, Supported I/O Modules,
above.
HART Pass Through entails usage of PC-based applications,
RX3i Analog modules with HART functionality and
(optionally) supporting PROFINET products. HART Pass
Through operation is described in the PACSystems HART Pass
Through User Manual, GFK-2929.
Distin- Earliest
guishing CEP001
Classes 3 Compatible
Version
None 1.00
5 None 1.00
ALG IN 4, 2.30
ALG OUT 2
ALG IN 4 2.30
ALG OUT 2
None 2.50
None 2.50
None 2.01
Chapter 1
Sep 2019
4
CEE001
Comp-
atible
7 N
N
Y
Y
N
N
Y
11