Chapter 4: Configuration; Configuration Overview; Basic Configuration Steps - Emerson PACSystems RX3i User Manual

User Manual
GFK-2883F
Chapter 4:
This chapter provides configuration procedures for RX3i CEP Carriers and their I/O modules
in a PROFINET I/O network. For information on configuring the PROFINET I/O Controller and
its LAN, refer to the I/O Controller manufacturer's documentation.
Note:
This chapter discusses the following topics:
•
•
•
•
4.1

Configuration Overview

The RX3i CEP receives its configuration from a PROFINET IO-Controller, which is configured
by a PROFINET I/O configuration tool. The GSDML files are provided with PAC Machine
Edition. For other PROFINET I/O configuration tools, the RX3i CEP GSDML must be imported.
The RX3i CEP GSDML can be obtained by contacting Emerson Technical Support.
Note:
4.1.1

Basic Configuration Steps

The basic configuration steps are:
•
•
Configuration
Configuration
To configure RX3i CEP Carriers in an RX3i Controller system, refer to the PACSystems RX3i &
RSTi-EP PROFINET I/O Controller Manual, GFK-2571.
Configuration Overview
Basic Configuration Steps
—
Configuration Tool
—
Adding RX3i CEP Carriers to a LAN
Configuring RX3i CEP Carriers
—
Adding RX3i I/O Modules to a Remote Node
—
▪ Adding and Configuring an Ethernet Port
▪ Configuring Discrete Modules that have DIP switches
▪ Configuring Analog Modules that have Jumpers
Configuring Module Parameters
—
Assigning IO-Device Names
After the Configuration is Stored to the PROFINET I/O Controller
For details on using the PAC Machine Edition PLC Logic Developer programmer to create and
download the configuration for an RX3i PROFINET network and its IO devices, refer to the
PACSystems RX3i & RSTi-EP PROFINET I/O Controller Manual, GFK-2571.
Configure a PROFINET IO-Controller and its PROFINET LAN using the Controller
manufacturer's recommended PROFINET I/O configuration tool.
Configure the parameters of the PROFINET Controller.
Add IO-Devices to the LAN.
Chapter 4
Sep 2019
27