Chapter 3: Installation And Mounting; Carrier Installation - Emerson PACSystems RX3i User Manual

User Manual
GFK-2883F
Chapter 3:
This chapter provides RX3i CEP Carrier installation instructions and information for selecting
network cabling and connectors as follows:
•
•
•
3.1

Carrier Installation

The CEP Carrier and Expansion Carrier can be mounted on a DIN-rail or a panel. As shown in
Figure 6, adequate installation space is required for:
1.
2.
3.
Figure 6: Mounting & Clearance Notes CEP001 & CEE001
Installation & Mounting
Installation and Mounting
Carrier installation and mounting
Installing RX3i CEP Carrier on a DIN-rail
—
Removing RX3i CEP Carrier from the DIN-rail
—
Panel mounting
—
Installing RX3i CEE Expansion Carrier
—
Removing RX3i CEE Expansion Carrier
—
Grounding
—
Power requirements
—
Installing modules on the carriers
—
Connecting power supplies
External switch VLAN priority settings
Clearance for communications port cables.
Power wiring
Operating the DIN latch.
Chapter 3
Sep 2019
18