Pc Health Monitor-Iii Software For 9Bxas/9Bxan - JETWAY 9BXAS Manual

Password allows you to change all CMOS settings but the User Password setting doesn't have
this function. The way to set up the passwords for both Supervisor and User are as follow:
1. Choose either Supervisor Password or User Password in the Main Menu and press
<Enter>. The following message appears:
"Enter Password:"
1. The first time you run this option, enter your password up to only 8 characters and press
<Enter>. The screen does not display the entered characters. For no password just press
<Enter>.
2. After you enter the password, the following message appears prompting you to
confirm the password:
"Confirm Password:"
4. Enter exact the same password you just typed again to confirm the password and press
<Enter>.
5. Move the cursor to Save & Exit Setup to save the password.
6. If you need to delete the password you entered before, choose the Supervisor Password and
Press <Enter>. It will delete the password that you bad before.
7. Move the cursor to Save & Exit Setup to save the option you did, otherwise the old password
will still be there when you turn on your machine next time.
3.10 SAVE & EXIT SETUP
The "SAVE & EXIT SETUP" option will bring you back to boot up procedure with all the changes
you just made which are recorded in the CMOS RAM.
3-11 EXIT WITHOUT SAVING
The "EXIT WITHOUT SAVING" option will bring you back to normal boot up procedure without
saving any data into CMOS RAM. All of the old data in the CMOS will not be destroyed.
4-1 PC HEALTH MONITOR-III SOFTWARE FOR 9BXAS, 9BXAN
PC Health Monitor-III Software for Windows 95/98
Please Run X：\INTEL\HEALTH3\SETUP.EXE
Chapter 4
23