Yamaha RS Venture RST9NJ Owner's Manual page 43

Table of Contents

Advertisement

Spring preload setting*:
Minimum (soft):
160.0 mm (6.30 in) (RST1NTF,
RST1NTFY)
161.0 mm (6.34 in) (RST9N)
Standard:
162.0 mm (6.38 in) (RST9N)
163.0 mm (6.42 in) (RST1NTF,
RST1NTFY)
Maximum (hard):
172.0 mm (6.77 in) (RST9N)
173.0 mm (6.81 in) (RST1NTF,
RST1NTFY)
* Distance A changes 1.5 mm (0.06 in)
with each full turn of the adjusting
nut.
3.
Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten the locknut to the speci-
fied torque.
[ECS00861]
Tightening torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
(RST9N)
30 N·m (3.0 kgf·m, 22 lb·ft)
(RST1NTF / RST1NTFY)
ESU13139
Adjusting the spring preload of the
center shock absorber and the rear
torsion springs
The spring preload can be adjusted by turn-
ing the adjusting nut on the center shock ab-
sorber and the adjusters on the rear torsion
springs. Adjust the spring preload as follows.
Center shock absorber
1.
Loosen the locknut.
2.
To increase the spring preload and
thereby harden the suspension, turn the
adjusting nut in direction (a). To decrease
Control functions
the spring preload and thereby soften
the suspension, turn the adjusting nut in
direction (b).
(b)
1. Spring preload adjusting nut
2. Distance A
3. Locknut
TIP
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The longer distance A is, the higher the
spring preload; the shorter distance A is, the
lower the spring preload.
Spring preload setting*:
Minimum (soft):
101.5 mm (4.00 in) (RST9N)
111.0 mm (4.37 in) (RST1NTF,
RST1NTFY)
Standard:
102.5 mm (4.04 in) (RST9N)
112.0 mm (4.41 in) (RST1NTF,
RST1NTFY)
Maximum (hard):
112.5 mm (4.43 in) (RST9N)
122.0 mm (4.80 in) (RST1NTF,
RST1NTFY)
* Distance A changes 1.5 mm (0.06 in)
with each full turn of the adjusting
nut.
3.
Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten the locknut to the speci-
fied torque.
[ECS00861]
1
3
2
(a)
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs venture rst1ntfjRs venture rst1ntfyj

Table of Contents