RST1NTF / RST1NTFY
1. Cylinder head cap
RST9N
1. Cylinder head cap
RST1NTF / RST1NTFY
2
1
1. Engine oil drain bolt (oil tank)
2. Gasket
Periodic maintenance and adjustment
1
RST9N
2
1
1. Engine oil drain bolt (oil tank)
2. Gasket
9.
Place an oil pan under the engine to col-
lect the used oil.
10. Remove the engine oil drain bolt and its
gasket to drain the oil from the crank-
case.
2
1
1. Engine oil drain bolt (crankcase)
2. Gasket
3. "
" mark
TIP
A "
" mark is stamped on the crankcase
near the engine oil drain bolt for easy iden-
tification.
Dispose of used oil according to local reg-
ulations.
Skip steps 11–13 if the oil filter cartridge is
not being replaced.
11. Remove the oil filter cartridge with an oil
filter wrench.
3
73