Yamaha RS Venture RST9NJ Owner's Manual page 18

Control functions
ton to switch the display between the various
tripmeter and odometer modes in the follow-
ing order:
TRIP F → ODO → TRIP A → TRIP B → TRIP F
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RE-
SET" button for at least 1 second. If you do
not reset the fuel reserve tripmeter manually,
it will reset itself automatically, and the dis-
play will return to the prior mode after the
snowmobile has been refueled and traveled 5
km (3 mi).
TIP
 Odometer resets and continues counting
when it reaches 99999 while riding. How-
ever on the 10th time, the odometer will
lock at 99999.
 Tripmeter A and tripmeter B reset and con-
tinue counting when they reach 999.9 while
riding.
Oil change tripmeter
Oil change tripmeter shows the distance trav-
eled since the periodic oil change interval
was reached.
When the periodic oil change interval is
reached at the initial 800 km (500 mi), then at
every 4000 km (2500 mi) thereafter, the oil
change tripmeter and "OIL" flash alternately
in the odometer display, and the tripmeter
starts counting the distance traveled from
that point. When this occurs, change the en-
gine oil as soon as possible. (See page 70 for
the oil change procedure.)
12
TIP
 The oil change tripmeter will flash only
when the snowmobile is stopped.
 To return to the previous display mode,
push the "SELECT" button. To display the
oil change tripmeter again, turn the key to
the off position, then back to the on posi-
tion.
After changing the engine oil, reset the oil
change tripmeter as follows.
To reset the oil change tripmeter (when the
engine oil was changed after the oil change
tripmeter appeared)
1. To display the oil change tripmeter, turn
the key to the on position.
2. Push the "RESET" button for at least 1
second while the oil change tripmeter
and "OIL" are flashing alternately in the
odometer display. The distance traveled
since the last oil change and "OIL" will
flash alternately in the odometer display.
3. Push the "RESET" button for approxi-
mately 3 seconds. "00000" and "OIL" will
flash alternately in the odometer display
3 times, and then the display will return
to the previous display mode.
If the engine oil is changed before the oil
change tripmeter appears in the display (i.e.,
before the periodic oil change interval has