Yamaha RS Venture RST9NJ Owner's Manual page 99

4. Unhook the bulb holder, and then re-
move the burnt-out bulb.
1. Bulb holder
5. Install a new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thorough-
ly clean it with a cloth moistened with
alcohol or lacquer thinner.
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
6. Install the bulb holder cover, and then
connect the headlight coupler.
7. Close the shroud.
RST1NTF / RST1NTFY
1. Remove the shroud and the top cover.
(See page 59 for removal procedures.)
Periodic maintenance and adjustment
[ECS00622]
2. Remove the headlight unit bolt and the
windshield stay bolts on each side of the
snowmobile.
2
1. Headlight unit bolt
2. Windshield stay bolt
3. Unhook the headlight unit as shown,
then lift it up and move it forward, away
from the handlebar. NOTICE: Be careful
not to scratch the snowmobile when
moving the headlight unit.
1. Headlight unit
4. Disconnect the headlight coupler.
5. Remove the bulb holder cover.
1
[ECS00921]
1
93