Table of Contents
Advertisement
Connector Communication Test
1.
Wire the cable with JC-25-P-3 (2.5mm stereo mini-
BHT connector communication port.
2.
S
elect "2: CONNECTOR" at the TEST COMMUNICATION menu
a
nd then press the ENT key.
T
he TEST COMMUNICATION screen displays as shown on the right.
If an error occurs, the BHT beeps three times and displays the screen on
the
right.
T
he meanings of the error codes in parentheses are as follows.
( X X )
1:
2:
1: 300 bps
2: 115200 bps
Press th
e C key to return to the TEST COMMUNICATION menu.
U
pon normal completion of the test, the BHT beeps once and displays the
s
creen on the right.
P
ress the C key to return to the TEST COMMUNICATION menu.
The received data is different fro
A timeout has occurred during standby for data
reception.
Barcode Handy Terminal
plug) as s
hown below and connect to the
m the sent data.
97
Advertisement
Chapters
Table of Contents
