Executing By Wake; Executing By Remote Wake - Denso BHT-604B User Manual

BHT-604B
 (Example 3) Recommended download method
After system initialization, first download the program to be executed simply by pressing the Power key
( ). In this case, this program is always registered at the beginning of the system directory management
unless the program has been deleted and another file downloaded.
Directory info
<Status following system initialization>
4.3.4 Executing by Wake-up
By specifying the wake-up time at the user program, the BHT can be started up at the wake-up time and a
program executed.
If an auto-start execution program has been selected at the System Mode "4.5.5 [1] Setting the auto-start
execution program", the selected program will be executed.
If no auto-start execution program has been selected, the first registered program from among the
programs (.PD4) registered in the BHT will be executed.
Refer to the "BHT-BASIC Programmer's Manual" for details.
4.3.5 Executing by Remote Wake-up
If remote wake-up is enabled, the BHT can be started up by receiving a control command from the host
computer. If a fixed file called "BHTRMT.PD4" exists in the BHT at this time, BHTRMT.PD4 will be
executed.
In other words, it is possible to execute the desired program by chaining from BHTRMT.PD4 using a
BHT-BASIC CHAIN statement.
Refer to "4.5.12 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu)" and the "BHT-BASIC
Programmer's Manual" for details.
44
(1) MAIN.PD4
(2) SUBMAIN.PD4
(3) AAAAAAAA.DAT
(4) BBBBBBBB.DAT
Download in
the order (1),
(2), (3), (4).
:
:
:
Directory info
MAIN.PD4
SUBMAIN.PD4
AAAAAAAA.DAT
BBBBBBBB.DAT
:
:
: